Oil Pressure Check; Crankshaft Oil Seals - PIAGGIO Beverly Tourer 300 i.e. Service Station Manual

Beverly Tourer 300 i.e.

Oil pressure check

- Remove the electrical minimum oil pressure
switch connection and remove the switch.
- Check that the oil pressure reading is between
0.5 and 1.2 atm with the engine idling at 1650 rpm
and the oil at the required temperature (wait for at
least one electric ventilation).
- Check that the oil pressure is between 3.2 and
4.2 atm with the engine running at 6000 rpm and
the oil at the required temperature.
- Remove the appropriate tools once the meas-
urement is complete, refit the oil pressure switch
and washer, tightening it to the specified torque
and fit the fan cover.
- If the oil pressure is not within the specified limits,
in the following order, check: the oil filter, the oil
by-pass valve, the oil pump and the crankshaft
seals.
N.B.
THE CHECK MUST BE CARRIED OUT WITH OIL AT THE
CORRECT LEVEL AND WITH AN OIL FILTER IN PROPER
CONDITION.
Characteristic
Oil pressure
Minimum pressure admitted at 6000 rpm: 3.2 atm.
Locking torques (N*m)
Minimum oil pressure sensor

Crankshaft oil seals

12 to 14
Engine
ENG - 163