Connection Of Plastic-Insulated Cables With Copper Cores, 3 X 95 Mm Up To 3 X; Mm 2 , Concentric Clamps - Eaton Magnefix MD4 User Manual

Magnefix MD4
3.8.2 Connection of plastic-insulated cables
with copper cores, 3 x 95 mm
2
240 mm , concentric clamps
W
ARNINGG
•
Always earth the installation.
•
Never work on a live or partly live installation.
Required materials

3 insulating conduits (a)

1 bag containing greased rubber sleeves (b)

3 sealing plugs (c)

2 protection covers (d)

1 extension protection cover (e) (optional)

3 cable core clamps (concentric), each consisting of
 1 connecting piece (1)
 2 washers with hexagon socket head screws (2)
 1 gland (3)

2 steel cable clamps or

2 plastic cable clamps
N
OTE
•
Concentric cable core clamps are only suitable
for connecting copper cable cores.
•
Terminate the cable cores and the splice in
accordance with the cable manufacturer's
instructions.
For cables with an aluminium core
Eaton cable core clamps are only suitable for connecting
cables with a copper core.
Aluminium cables are to be connected to the Magnefix
copper connection pins using copper/aluminium crimp
cable sockets.
This prevents stress corrosion.
Concentric crimp cable clamps consist of:

1 cable socket (1);

1 clamping ring with socket-head screw (2).
Basically, any type of cable core clamp can be used,
provided it remains within the maximum permitted
dimensions of  40 x 110 mm when crimped.
58 991.184 G01 03
2
up to 3 x
1A Concentric cable core clamps
Cu 95 to 240 mm
1B Crimp cable clamp, Al, up to 240 mm
1C Space available for cable sockets
2
2