With Plastic Entry Bushing47 - Eaton Magnefix MD4 User Manual

3.6.4 PILC with copper or aluminium cores
up to 3 x 240 mm
bushing
W
ARNING
•
Always earth the installation.
•
Never work on a live or partly live installation.
Required components
For cables with a copper core

1 large cable box (b)

2 protection covers (c)

2 hose clips (d)

polyethylene tape (e)

1 O-ring (f)

plastic entry bushing (h)

fixing shells (k)

3 cable core clamps (concentric), each consisting of
 1 connecting piece (1)
 2 washers with hexagon socket head screws (2)
 1 gland (3)

2 steel cable clamps
For cables with an aluminium core Eaton cable core
clamps are only suitable for connecting cables with a
copper core.
Aluminium cables are to be connected to the Magnefix
copper connection pins using copper/aluminium crimp
cable sockets.
This prevents stress corrosion.
Concentric crimp cable clamps consist of:

1 cable socket (1);

1 clamping ring with socket-head screw (2).
Basically, any type of cable core clamp can be used,
provided it remains within the maximum permitted
dimensions of  40 x 110 mm when crimped.
2
, with plastic entry
Cable boxes for paper-insulated lead-covered cables
2
up to 3 x 240 mm , with plastic entry bushing.
1A Concentric cable core clamps
2
Cu 95 to 240 mm
1B Crimp cable clamp, Al, up to 240 mm
1C Space available for cable sockets.
Magnefix MD4
2
991.184 G01 03 47