Cable Boxes For Plastic-Insulated Cables (Xlpe); Cable Boxes To Non-Standard Specification - Eaton Magnefix MD4 User Manual

Magnefix MD4
3.5.5 Cable boxes for plastic-insulated
cables (XLPE)
A dry cable box is available for connecting plastic-insulated
cables. This cable box consists of a plastic sleeve for each
phase. This cable box is also used for:

single-core cables up to 240 mm

three-core cables up to 3 x 240 mm

single-core Eaton transformer cable.
A cable box for plastic-insulated cable consists of:

3 insulating conduits (a).

1 bag containing 3 rubber sleeves treated with silicone
grease (b).

3 tapered sealing plugs (c).

2 protection covers (d).

1 extension protection cover (optional) (e).
The protection covers protect the cable cores against
touching. This provides double insulation.
N
OTE
Terminate the cable cores and the splice in
accordance with the cable manufacturer's
instructions.
3.5.6 Cable boxes to non-standard
specification
It is possible to use a different make of cable box or a
combination of an Eaton cable box with a non-standard
cable termination material.
In this case terminate the cable and/or cable box in
accordance with the instructions of the relevant
manufacturer. If in doubt, please contact Eaton Service for
advice.
34 991.184 G01 03
2
,
2
Cable box for XLPE cables.