Risks Caused By The Product; Risk Caused By Special Location / Ambient Conditions; Risk Of Electric Shock When Plug Has Been Screwed Off; Risk Caused By Hazardous Atmosphere - Kessel Aqualift F XL Instructions For Installation, Operation And Maintenance

Pumping station, dry set-up
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 41
2.4

Risks caused by the product

2.4.1 Risk caused by special location / ambient conditions

Risk caused by toxic and hazardous vapours, gases and substances (e. g. bacteria, viruses). If the pumping
station is located in an inspection chamber, any necessary work must always be done by specialist staff (see
2.2).

2.4.2 Risk of electric shock when plug has been screwed off

There is a risk of electric shock at the control unit (230V model type only) if one of the plugs for power supply
to the pumps has been dismantled. The union nut on the electric plug must be fitted so tightly that it cannot be
loosened without a tool (e.g. by children) (see 3.8).

2.4.3 Risk caused by hazardous atmosphere

There is a risk of a hazardous atmosphere occurring in the chamber during work. Make sure the system is well
aerated and use safety equipment such as e.g. a multi-gas warning device if appropriate.

2.4.4 Health risks

The pumping station pumps wastewater with sewage which can contain hazardous substances. Make sure
eyes, mouth or skin do not come into direct contact with the wastewater or parts of the system soiled by it. In
the case of direct contact, the part of the body affected must be washed thoroughly immediately and disinfected
if necessary. Wear personal protective equipment.

2.4.5 Risk caused by noise

Operation of the pumping station can cause a high noise level. Wear appropriate protective equipment if
necessary and take sound-insulating measures.

2.4.6 Explosion hazard

he currently valid Ordinance on Industrial Safety and Health and the Ordinance on Hazardous Substances
must be observed. A risk assessment must evaluate potential hazards for normal operation and all work on the
system itself. This can result in special measures having to be applied, such as the sufficient exchange of air
If the wastewater tank is open, make sure there are no sources of ignition in the direct vicinity (e.g. operation of
electrical devices without encapsulated motor, metal working, smoking etc.).
2016/05
Safety
51 / 240

Advertisement

Table of Contents
loading

Table of Contents