Functions Of All Keys / Displays; Acknowledging The Alarm; Switching Off - Kessel Aqualift F XL Instructions For Installation, Operation And Maintenance

4.4

Functions of all keys / displays

19 LED
20* LED
21 LED
22 LED
66 Cursor up
67 Cursor down
68 ESC
69 Alarm
71 Pump / Test
72 OK
73* Pump / Test
* Pumping station model type DUO (2 pumps)
4.5

Acknowledging the alarm

If a state occurs which triggers an alarm (e.g. fault on a pump, level of the wastewater has reached the alarm
level), the alarm LED <21> will light up. A plain text fault message may be shown on the display. After the cause
of the alarm has been eliminated, the alarm can be acknowledged by pressing key <69>.
– To switch the alarm sound off: Press key <69> 1x
– To acknowledge the alarm: Press key <69> 1x and keep pressed for longer than 5 seconds.
4.6

Switching off

• Turn the main switch to position O (OFF), an alarm signal is sounded and the alarm LED <21> flashes.
• Switch the alarm signal off, to do this keep key <69> pressed until the alarm symbol on the display is shown
crossed out.
• Switch the control unit off, to do this keep key <69> pressed until the display and the alarm LED are switched
off.
The pumping station is switched off.
2016/05
Operation
Pump 1
Pump 2
Alarm
Ready for operation
Scrolling in the menu
Scrolling in the menu
Deletion of an entry, back
Acknowledge the acoustic alarm
Pump 1 ON / OFF
Confirmation of an entry, next level
Pump 2 ON / OFF
61 / 240
Ill. [14]