Product Description - Kessel Aqualift S LW600 Installation And Operating Manual

2.4

Product description

The system has been designed for underground installation in the inspection
chamber provided with the clear width 600 mm, outside buildings. Groundwa-
ter resistance is given up to max. 2.5 m. The system is produced for equipping
with one or two pumps (mono/duo). The layout of the two pumps and their
piping is symmetrical.
The following characteristics are available as variants:
• Float switch or pneumatic level measurement accordingly with/without
control unit
• Pump(s) for wastewater without sewage KTP 500 or GTF 1200
• Pump(s) for wastewater containing sewage STZ 1000 (not suitable for ATEX)
• Installation depths T1, T2, T3
Function components
Pos. no. 1 Functional components
One or two washwater pumps
(1)
Chamber system LW 600
(2)
Inlet pipe (DN 100 for pump type KTP 500/
(3)
DN 150 for pump type GTF 1200)
Connection drainage pipe (DN 100)
(4)
Cover
(5)
Vertically adjustable upper section
(6)
Connection for cable conduit (DN 100)
(7)
Backwater flap(s)
(8)
Connecting socket for pressure pipe (DN 32)
(9)
Level detection (submersible pressure switch shown here)
(10)
26 Installation and operating manual
5
4
3
2
1
Fig. [1]
6
7
8
9
10
328-198