Introduction; Product Description, General - Kessel Aqualift F XL Instructions For Installation, Operation And Maintenance

1

Introduction

Dear
customer,
We are pleased that you have decided to buy one of our products. This will certainly completely match your
requirements. We wish you smooth and successful installation.
In trying to keep our quality standard as high as possible, we rely on your help of course. Please let us know of any
possible improvements we could make to our product.
Have you got any questions? We look forward to you getting in touch.
1.1

Product description, general

The KESSEL pumping station Aqualift F XL (referred to as „pumping station" from here onwards) has been designed
for pumping off wastewater with and without sewage. The wastewater tank houses the pump(s) and the level
sensor(s). All the assemblies have been matched to the KESSEL control unit included. The pumping station is
delivered with different wastewater pumps.
The sensor switching signals for the wastewater level are processed electronically in the control unit. A pressure
sensor is used as a level sensor. When the filling volume has been reached, the pump-off function is activated.
When the level has fallen accordingly again, pumping off is ended.
If two wastewater pumps are connected, they are switched on either individually or together, depending on the
filling volume and positioning of the level sensors.
Different elements of the chamber system (010-701) can be mounted onto the wastewater tank. Together with the
functional element mounted on it, the wastewater tank then represents the base element of the chamber. When
installation is done in the correct order and professionally, the inspection chamber is already completely installed
when the pumping station is installed.
Introduction
44 / 240 2016/05