Page 244 of 262
553-3001-119 Standard 2.00 April 2000
Maintenance
Reattempt a software download from the MAT host. Use the
Case 2:
following commands:
upgradeErase
upgrade "hostname","hostAccount","hostPassword",
"hostDirectoryPath","hostSWFilename"
After the software loads to flash, reboot the card:
sysReboot
If the failure to load the ITG software into RAM persists, then the flash device
is faulty. Replace the IP Line card.
The escape sequence "xxx" is rarely transmitted. Reboot the card.
Case 3: