Nortel Meridian 1 Description, Installation And Operation page 232
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 232 of 262
Table 16
File Transfer Commands
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
553-3001-119 Standard 2.00 April 2000
Maintenance
ITG> traceFilePut "47.82.xx.xxx","anonymous","guest","/trcDir","trcFile"
currLogFilePut hostname, username, password, directory path, filename
The logFilePut task on the ITG host initiates an FTP session with the given
parameters and downloads the IP Line card's logfile the to specified location on
the host.
ITG> currLogFilePut "47.82.xx.xxx","anonymous","guest","/currDir",
"logFile"
prevLogFilePut hostname, username, password, directory path, filename
The logFilePut task on the ITG host initiates an FTP session with the given
parameters and downloads the IP Line card's logfile the to specified location on
the host.
ITG> prevLogFilePut "47.82.xx.xxx","anonymous","guest","/currDir",
"logFile"
currGKOmFilePut hostname, username, password, directory path, filename
The omFilePut task on the ITG active leader/backup leader card initiates an FTP
session with the given parameters and uploads the IP Line card's gatekeeper
operational measurements to the specified location on the host.
ITG> currGKOmFilePut "47.82.xx.xxx","anonymous","guest","/currDir",
"GKomFile"
prevGKOmFilePut hostname, username, password, directory path, filename
The omFilePut task on the ITG active leader/backup leader card initiates an FTP
session with the given parameters and uploads the IP Line card's previous
gatekeeper operational measurements to the specified location on the host.
ITG> prevGKOmFilePut "47.82.xx.xxx","anonymous","guest","/prevDir",
"GKomFile"
GKtraceFilePut hostname, username, password, directory path, filename
The traceFilePut task on the ITG active leader/backup leader card initiates an
FTP session with the given parameters and uploads the IP Line card's gatekeeper
call trace file to specified location on the host.
ITG> GKtraceFilePut "47.82.xx.xxx","anonymous","guest","/trcDir", "trcFile"
Advertisement
Table of Contents
