Add An Itg Node On Mat By Retrieving An Existing Node - Nortel Meridian 1 Description, Installation And Operation

Page 136 of 262
$GG#DQ#,7*#QRGH#RQ#0$7#E\#UHWULHYLQJ#DQ#H[LVWLQJ#QRGH
553-3001-119 Standard 2.00 April 2000
Installation and configuration
This is an optional procedure that may be used in the following cases:
• You may choose to add existing nodes to a particular MAT ITG PC in
order to manage the ITG network from a single point of view.
• This procedure may also be used to restore the ITG configuration
database to a MAT ITG PC whose hard drive had crashed, as an
alternative to restoring the MAT ITG nodes from the MAT Disaster
Recovery Backup.
Once the ITG node has been installed and configured manually, that node
may be added to another MAT ITG PC by retrieving the configuration data
from the existing ITG node.
The site name, Meridian 1 system name, and Meridian 1 customer number
must exist in the MAT Navigator before you can add a new ITG node. Only
one ITG node can be added in the MAT ITG application per Meridian 1
customer.
Note: If multiple MAT ITG PCs are used to manage the same ITG
network, care must be taken to synchronize the different copies of the
ITG database. The MAT ITG
function can be used to synchronize the MAT ITG database with the
database on the ITG node.
&RQILJXUDWLRQ_6\QFKURQL]H_5HWULHYH