Nortel Meridian 1 Description, Installation And Operation page 117

6103#WUDSV
13 Click the
Note: The term "SNMP trap" refers to the sending of ITG error
messages to the locations specified by the SNMP Manager IP addresses.
Checking the "Enable SNMP traps" box will enable sending of SNMP
traps to the SNMP managers that appear in the list.
14 To add an SNMP Manager IP address, type the address in the entry field,
$GG
and click . You should add SNMP Manager IP addresses for:
• the local MAT PC
• PPP IP address configured in the Netgear RM356 Modem Router, or
equivalent, on the E-LAN for the remote support MAT PC
• the SNMP manager for remote alarm monitoring via SEB2 and IRIS
nGEN (if present).
• Any remote MAT PCs on the customer's IP network.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Installation and configuration
tab.
Page 117 of 262
553-9288