Nortel Meridian 1 Description, Installation And Operation page 119

,3#&OLHQWV
16 Click the
The "IP Clients" tab is used to define the DN and password for each of the 24
configured TNs on the IP Line card. The list of TNs is built by MAT when
the card is added via the Node Properties. This MAT configuration must be
coordinated with the overlay 11 Meridian 1 configuration.
17 Select the first TN in the list.
18 Enter the "DN" and "Password" fields. Check the "Make password same
as DN" field if the default password is to be the DN.
&KDQJH
19 Click the
The "Synch status" becomes "Changed."
20 Repeat the DN and password configuration for each TN in the list.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Installation and configuration
tab.
$SSO\
button then .
Page 119 of 262