Nortel Meridian 1 Description, Installation And Operation page 188

Page 188 of 262
8SGDWH#,3#/LQH#FDUG#'63#SURSHUWLHV
553-3001-119 Standard 2.00 April 2000
Administration
Note: The properties of all DSPs on an IP Line card are modified by
configuring the properties for "DSP 0" on an IP Line card. The "Restore
defaults" button can be used to restore all default values including
restoring the coding algorithm to G.729AB.
The default DSP parameters for the codec are suitable for most
applications. If you are not an expert in voice over IP, do not modify
them.
1 In the "MAT Navigator" window select the
from the "Services" folder.
In the "IP Telephony Gateway - IP Telecommuter" window select the IP
2
Line card that will have its DSP properties modified.
Click the right mouse button on the card and select
3
from the popup menu. The "IP Line card Properties" window appears.
'63#3
Click the
4
&$87,21
icon underneath the IP Line card.
,7*#,3#7HOHFRPPXWHU
&DUG#_#3URSHUWLHV
icon