Nortel Meridian 1 Description, Installation And Operation page 233

Table 16
File Transfer Commands
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Table 17
IP Configuration Commands
Synopsis:
Description:
Example:
Synopsis:
currGKLogFilePut hostname, username, password, directory path, filename
The logFilePut task on the ITG active leader/backup leader card initiates an FTP
session with the given parameters and uploads the IP Line card's gatekeeper log
file to specified location on the host.
ITG> currGKLogFilePut "47.82.xx.xxx","anonymous","guest","/currDir",
"GKlogFile"
prevGKLogFilePut hostname, username, password, directory path, filename
The logFilePut task on the ITG active leader/backup leader card initiates an FTP
session with the given parameters and uploads the IP Line card's previous
gatekeeper log file to specified location on the host.
ITG> prevGKLogFilePut "47.82.xx.xxx","anonymous","guest","/prevDir",
"GKlogFile"
hostFilePut hostname, username, password, directory path, file-
name, ITGFileName
Transfers any file on the IP Line card from location ITGFileName and does a put
via FTP to the host specified by hostname, username, password and directory
path.
Note: ITGFileName is the full path, i.e. path/filename, of where the file is taken
from on the IP Line card.
ITG> hostFilePut "ngals042", "anonymous", "guest", "/hostDir",
"hostFile", "/C:/CONFIG/CONFIG1.INI"
NVRIPSet "IP address"
Sets the IP address in NVRAM.
ITG> NVRRIPSet "47.23.34.19"
NVRGWSet "IP gateway"
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Maintenance Page 233 of 262