Nortel Meridian 1 Description, Installation And Operation page 100

Page 100 of 262
553-3001-119 Standard 2.00 April 2000
Installation and configuration
as the backup leader. MAT displays "enable:active" for Leader 0 and
"enable:standby" for Leader 1 on the card state field.
At other times, the leader card states may be reversed so that Leader 1
functions as the active leader and Leader 0 as the backup leader.
Click the Configuration tab.
1
To add a card:
2
Enter the "Management IP", "Management MAC", "Voice IP", and
a
"Card TN" fields. These fields are mandatory. The "Management
MAC" address is labeled on the faceplate on the IP Line card.
Select "Leader 0", "Leader 1", or "Follower" from the "Card role"
b
pull-down menu.
Click Apply then OK .
c
Repeat the previous steps for each card to be added within that ITG
3
Node.