Nortel Meridian 1 Description, Installation And Operation page 234
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 234 of 262
Table 17
IP Configuration Commands
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
553-3001-119 Standard 2.00 April 2000
Maintenance
Sets the default gateway address in NVRAM.
ITG> NVRRGWSet "47.0.0.1"
NVRSMSet "subnet mask"
Sets the subnet mask in NVRAM..
ITG> NVRRSMSet "255.255.240.0"
NVRIPShow
Prints the values of the IP parameters that reside in NVRAM.
ITG> NVRIPShow
nvramLeaderSet "IP address", "IP gateway", "subnet mask"
Sets the leader bit in NVRAM.
ITG> nvramLeaderSet
nvramLeaderClr
Clears the leader bit in NVRAM, but does not erase the IP parameters in
NVRAM
ITG> nvramLeaderClr
setLeader "IP address", "IP gateway", "subnet mask"
The one command that does all the necessary actions to make a leader. Sets IP
address, gateway, subnet mask, boot method to static, and leader bit in NVRAM.
ITG> setLeader "47.23.45.67", "47.0.0.1", "255.255.240.0"
clearLeader
Advertisement
Table of Contents
