Nortel Meridian 1 Description, Installation And Operation page 172

Page 172 of 262
$GGLQJ#DQ#,3#/LQH#FDUG#WR#WKH#QRGH
553-3001-119 Standard 2.00 April 2000
Administration
Configure the "Network connections" parameters: "Node IP, Voice
5
gateway IP, Management gateway IP, Voice subnet mask, and
Management subnet mask." See your network administrator for
assignment of these IP addresses.
If IP Line cards are to be added or deleted from the node or changed
6
(refer to the Maintenance section for the procedure to replace an IP Line
card), then use one of the following procedures:
• "Adding an IP Line card to the node" on page 172
• "Deleting an IP Line card from the node" on page 182
• "Changing an IP address" on page 183
In the "MAT Navigator" window select the
1
from the "Services" folder.
2 In the "IP Telephony Gateway - IP Telecommuter" window, select
_#3URSHUWLHV
from the popup menu. The ITG Node Properties window is
displayed.
Click the "Configuration" tab.
3
To add a card:
4
— Enter the "Management IP", "Management MAC", "Voice IP", and
"Card TN" fields. These fields are mandatory. The "Management MAC"
address is labeled on the faceplate on the IP Line card.
Note: Refer to and update the IP Line card MAC and IP addresses on the
IP Line card Installation Summary Sheet.
— Select "Leader 1", or "Follower" from the "Card role" pull-down menu.
$GG
Click the
5
$SSO\
Click then
6
Add the IP Line card in the Meridian 1 overlay 11. Refer to the
7
Installation section for Meridian 1 configuration information.
3K\VLFDO#FDUG#LQVWDOODWLRQ
Identify the IPE card slots selected for the new IP Line card.
8
button.
2.
.
,7*#,3#7HOHFRPPXWHU
icon
1RGH#