Nortel Meridian 1 Description, Installation And Operation page 141

The "ITG - Retrieve Options" window appears.
4 Leave the defaulted "Retrieve to selected nodes" option selected, or click
the "Retrieve from selected cards," depending upon the situation:
• Leave the defaulted "Retrieve to selected nodes" when the MAT ITG
data is out of date and you intend to synchronize all MAT ITG node data
with the data from the IP Line cards on the node, or if you are adding a
node on MAT by retrieving from an existing node that consists of more
than one card.
• Select "Retrieve from selected card" when you are attempting to isolate
a problem with ITG configuration on a particular card.
Check the boxes for the ITG configuration data that you wish to retrieve,
5
depending upon the situation:
• Select "Node Properties," "GK Properties" and "Card Properties," if the
MAT ITG data is out of date and you intend to synchronize all MAT ITG
node data with the data from the IP Line cards on the node.
• Select "Card Properties" if you are adding a node on MAT by retrieving
from an existing node that consists of more than one card.
• Select any combination of check boxes as indicated by problem
symptoms when you are attempting to isolate a problem on a particular
card. Use the "dummy" node for this purpose.
6WDUW#UHWULHYH
6 Click the
Monitor the progress of the retrieval in the "Retrieve control" box. The
retrieved "Node Properties," "GK Properties" and "Card Properties," will
over-write the existing MAT ITG configuration data for the respective node
or card.
The "Retrieving the ITG configuration information from the ITG node"
procedure is complete.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
Installation and configuration
button.
Page 141 of 262