Nortel Meridian 1 Description, Installation And Operation page 183

Click
7
Remove the IP Line cards via the MAT System Passthru terminal, ESN
8
MAT application, or via a Meridian 1 system management terminal
directly connected to a TTY port on the Meridian 1. Use overlay 11.
&KDQJLQJ#DQ#,3#DGGUHVV
To change the IP address of IP Line card(s): Click
1
&RQILJXUDWLRQ_1RGH_3URSHUWLHV. Update the IP Line card IP
addresses as required.
When all updates to the IP addresses have been made, click
2
2.
in the "ITG Node Properties" window. Or click
wish to save the changes.
Transmit the node properties to the Leader 0 card:
Select the Leader 0 IP Line card in the IP Telephony Gateway - IP
3
Telecommuter window.
Click the
4
Click the "Transmit to selected nodes" radio button.
5
Click the "Node Properties" check box.
6
7 Click the
The results of the download appear in the "Transmit control" box.
Click
8
9 If you have changed IP addresses of any cards, restart the cards for the
changes to take effect.
ITG Line 1.0/IP Telecommuter Description, Installation and Operation
$SSO\ 2.
then .
&RQILJXUDWLRQ
menu, then
6WDUW#'RZQORDG
&ORVH
.
Administration
6\QFKURQL]H
button.
Page 183 of 262
$SSO\#
then
&DQFHO
, if you do not
7UDQVPLW
, then .
#