Nortel Meridian 1 Description, Installation And Operation page 212

Page 212 of 262
553-3001-119 Standard 2.00 April 2000
Maintenance
Table 12
ITG system error messages (alarms)
ITG0208 Backup leader has been activated (i.e., has promoted itself to
active leader) because the active leader is no longer responding to
ping on the T-LAN.
ITG0250 Invalid X12 message received. Message discarded.
Major Alarms - Intervention required but not
immediately
ITG0300 Memory allocation failure.
ITG0301 Channel not responding. Channel is disabled.
ITG0302 DSP device failure. Operating on reduced capacity.
ITG0303 DSP subsystem failure. Initiating card reboot.
ITG0304 Cannot write to file. I/O write error.
ITG0305 Can't open configuration file. Using default settings.
ITG0306 Meridian Messaging error threshold exceeded.
ITG0307 Not used.
ITG0308 Address Translation failure. Call is released.
ITG0309 Unexpected DSP channel closed. Channel is unusable.
ITG0310 Can't open DSP channel.
ITG0311 Unable to get response from Follower card.
ITG0312 Unable to push BOOTP tab file to backup leader.
ITG0350 Gatekeeper RAS reject threshold exceeded.
ITG0351 Can't open gatekeeper configuration file. Using default settings.
Major Alarms - Immediate Intervention Required
ITG0400 Fatal self-test failure. Card is out of service.
ITG0401 Reboot threshold exceeded. Manual intervention required.