Nortel Meridian 1 Description, Installation And Operation page 236
Internet telephony gateway (itg) line 1.0/ip telecommuter
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 236 of 262
Table 18
Card Commands
Synopsis:
Description:
Table 19
DSP Commands
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
Example:
Synopsis:
Description:
553-3001-119 Standard 2.00 April 2000
Maintenance
cardReset
Performs a warm reboot of the IP Line card. The card has to be in OOS state to
be able to use this command.
DSPReset DSPNumber
Resets the specified DSP
ITG>DSPReset 0
DSPSelfTest DSPNumber
Runs selftest on the DSP
ITG>DSPSelfTest 0
DSPNumShow DSPNumber
Prints number of DSPs on IP Line card.
ITG>DSPNumShow 0
DSPPcmLpbkTestOn DSPNumber
Stops pcm loopback test on the specified DSP.
ITG>DSPPcmLpbkTestOn 0
DSPPcmLpbkTestOff DSPNumber
Stops pcm loopback test on the specified DSP.
Advertisement
Table of Contents
