Install A Drive Or Drive Filler - Oracle SPARC T5-1B Service Manual

Install a Drive or Drive Filler

Install a Drive or Drive Filler
The physical address of a drive is based the slot in which it is installed. See
Configuration" on page
Note -
(If needed) Remove a drive.
1.
See "Remove a Drive or Drive Filler" on page
2. Identify the slot in which to install the drive.
If you are replacing a drive, ensure that you install the replacement drive in the same slot as
■
the drive you removed.
If you are adding an additional drive, install the drive in the next available drive slot.
■
(If needed) Remove the drive filler from this slot.
3.
See "Remove a Drive or Drive Filler" on page
60 SPARC T5-1B Server Module Service Manual • February 2019
54.
All drive bays must be populated with a drive or drive filler.
58.
58.
"Drive