Oracle SPARC T5-1B Service Manual page 79

Ensure that the tab is aligned with the key.
3. Seat the SP card into the connector by pressing the card toward the tabs while
pressing down (panel 3).
When the SP card is in place, the lever will close.
Return the server module to the chassis.
4.
See "Returning the Server Module to Operation" on page
Access Oracle ILOM on the SP.
5.
See "Log Into Oracle ILOM (Service)" on page
This message might be displayed:
Unrecognized Chassis: This module is installed in an unknown or
unsupported chassis. You must upgrade the firmware to a newer
version that supports this chassis.
6. Download the system firmware.
Refer to Servers Administration and to Oracle ILOM documentation for instructions.
7. Set the clock's day and time.
Enter the datetime value in the form MMDDHHMMYYYY.
For example:
99.
21.
Servicing the SP Card
Install the SP Card
79