Oracle SPARC T5-1B Service Manual page 59

See "Drive LEDs" on page
taken offline using cfgadm or an equivalent command. The LED will not be illuminated if
Oracle Solaris was shut down.
4. Remove the drive.
a. Push the latch release button on the drive (panels 1 and 2).
b. Grasp the latch and pull the drive out of the drive slot (panel 3).
5. Install a drive or drive filler.
See "Install a Drive or Drive Filler" on page
Related Information
"Install a Drive or Drive Filler" on page 60
■
56. The blue LED will be illuminated only if the drive was
60.
Remove a Drive or Drive Filler
Servicing Drives 59