Table of Contents
Advertisement
Squeeze both latches on each of the two ejector arms.
5.
Pull the server module out (panel 2 and panel 3).
Close the ejector arms.
6.
Remove the server module from the modular system (panel 3).
7.
Lift the server module with two hands.
8.
Place the server module on an antistatic mat or surface.
9.
Insert a filler panel into the empty chassis slot.
When the modular system is operating, you must fill every slot with a filler panel or a
Caution -
server module within 60 seconds.
10.
Access internal server module components.
See
"Accessing Internal Components" on page
Remove the Server Module From the Modular System
50.
Preparing for Service
49
Advertisement
Chapters
Table of Contents
