Servicing the ID PROM
The ID PROM, sometimes referred to as the SCC, provides the server module with the host ID,
MAC addresses, and some Oracle ILOM configuration information.
The ID PROM does not typically require replacement. However, if you replace the ID PROM,
be aware that the host ID and MAC address will change.
When you replace the enclosure assembly, swap the ID PROM from the original enclosure
assembly to the replacement enclosure assembly. This action ensures that your server module
will maintain the same host ID and MAC address. See
(Motherboard)" on page
"Remove the ID PROM" on page 81
■
"Install the ID PROM" on page 83
■
"Verify the ID PROM" on page 85
■
Related Information
"Detecting and Managing Faults" on page 17
■
"Preparing for Service" on page 39
■
Remove the ID PROM
1.
Prepare for service.
See
"Preparing for Service" on page
2.
Locate the ID PROM on the motherboard.
See
"Component Locations" on page
95.
39.
13.
"Servicing the Enclosure Assembly
Servicing the ID PROM
81
Need help?
Do you have a question about the SPARC T5-1B and is the answer not in the manual?
Questions and answers