Tag Detection Counter; Tag Memory Counter; Downloading Tag Ids From Is1001 Reader Memory - Biomark IS1001 Operation User's Manual

Detecting and Capturing Tag IDs
•
Optional BLE Data Logger Board can be used to store tag data on its extended flash
memory. See BLE Data Logger User Manual for details on collecting data.

Tag Detection Counter

The tag detection counter shows the number of tag IDs that have been detected since the IS1001
reader was powered on or since the counter was reset.
•
The tag counter behavior is configured using the Set Detection Counter setting. See the
DCS command in the IS1001 Reader Commands section beginning on page 28
•
To view the number of tag detections, generate a full status report (see page 39).

Tag Memory Counter

The tag memory counter shows the number of tag IDs stored in IS1001 reader internal memory.
To view this counter, generate a full status report (see page 39).

Downloading Tag IDs from IS1001 Reader Memory

To download tag IDs and short status reports that are stored in IS1001 reader's internal memory,
use the MED command. The data will be sent only to the port that initiated the MED command.
18
.
X
IS1001 Reader User Manual