Biomark IS1001 Operation User's Manual page 44

Reports Structures
Communication
Local Port Speed
Tags to Local Port
Alarms to Local Port
Messages to Local Port
Remote Port Protocol
Remote Port Transfer Rate
Detection
HDX Tag Detection
Fastag Detection
FDXB Tag Signal Level Detection
BioTherm Tag Temperature
Detection
Detection Counter Enabled
Unique Mode
Unique Delay
FDXB Detection Scan Time
VTT Level
Auto VTT Delay
Measurements
Antenna Current Gain
Antenna Current Offset
Memory
Tags Memory Size
Status Reports Memory Size
Store Tags to Memory
Store VTT to Memory
Store Stat. Reports to Memory
Reports
Auto Noise Report Delay
Auto Status Report Delay
Diagnostics
Detection Counter
Tags in Memory
Status Reports in Memory
40
Reader local USB port speed setting
Tags communication to local USB port setting (Enabled/Disabled)
Alarms communication to local USB port setting (Enabled/Disabled)
Messages communication to local USB port setting (Enabled/Disabled)
Reader remote port communication protocol setting (ASCII/MODEM)
Reader remote port data transfer rate setting (Full/Slow)
HDX tag detection setting (Enabled/Disabled)
FDX-B Fastag tag detection setting (Enabled/Disabled)
FDX-B tag detection signal level measurement setting (Enabled/Disabled)
BioTherm tag temperature detection setting (Enabled/Disabled)
Detection counter setting (Yes/No)
Detection unique mode setting (Last 5/Last 1/Delay/Disabled)
Detection unique delay setting in seconds (1 – 43200)
FDX-B detection scan time in milliseconds (45 – 500)
Virtual Test Tag level setting (0 – 255)
Automatic Virtual Tag Test delay setting in minutes (Disabled/1 – 1440)
Antenna current measurement gain setting (0 – 200)
Antenna current measurement offset setting (0 – 200)
Maximum number of tag IDs that can be stored in memory
Maximum number of short status reports that can be stored in memory
Store detected tags to memory setting (Enabled/Disabled)
Store Virtual Test Tags to memory setting (Enabled/Disabled)
Store status reports to memory setting (Enabled/Disabled)
Automatic noise report delay setting in minutes (Disabled/1 – 1440)
Automatic status report delay setting in minutes (Disabled/1 – 1440)
Detection counter value
Number of tag IDs presently stored in memory and percentage of memory used
Number of short status reports presently stored in memory and percentage of memory
used
IS1001 Reader User Manual