IS1001 Reader Ethernet Port Operation
5. To verify the connection between the computer and the IS1001 reader, within BioTerm or
BioStat Traffic window type ? and then press Enter. A list of available commands should be
displayed. All the commands are described in detail on page 28.
6. Type appropriate commands to perform the desired actions.
7. To save all communication data, such as tag IDs, alarm messages, reports, etc., in a text file
configure the BioTerm utility program to act as a data logger by selecting Tools > Enable
Capture or by clicking on the Text Capture On/Off button.
24
IS1001 Reader User Manual