Biomark IS1001 Operation User's Manual page 39

MTG {1|0}
MVT {1|0}
Reader
RBS {1|0}
RDF {H|D}
RDP
RDS {MM/DD/YYYY}
RID {1,0}
RIS {01-FF}
RIT {0-10000}
IS1001 Reader User Manual
Save Tags to Memory {1} On, {0} Off
Specifies if tag IDs will be stored in memory as they are detected.
Valid values are On or Off. Default is On.
Save Virtual Tags to Memory {1} On, {0} Off
Specifies if Virtual Test Tag IDs will be stored in memory as they are
detected. Valid values are On or Off. Default is On.
Set Reader Beeper {1} On, {0} Off
Specifies if the IS1001 reader's internal speaker will issue an
audible beep when a tag is detected. Valid values are On or Off.
Default is Off.
Note: The IS1001 reader's internal beeper is contained on the
optional accessory boards.
Set Reader Tag ID Display Format {H} Hexadecimal, {D} Decimal
Specifies the format for displaying detected tag IDs. Valid values are
Hexadecimal or Decimal. Default is Hexadecimal.
Reset to Factory Default Parameters
Replaces all IS1001 reader present settings with the factory default
values.
Note: Current Measurement Gain and Current Measurement Offset
present values will be preserved and will not be changed to default.
Set Reader Date
Sets the IS1001 reader's real-time clock present date. The date is
specified as mm/dd/yyyy.
Set Reader Initiation Delay {1} On, {0} Off
Specifies if the IS1001 reader will delay the startup diagnostics and
the schedule of all enabled automatic diagnostics. These
diagnostics include Virtual Tag Test, Status Report and Noise
Report. All other functionalities, including tag detection, are not
delayed. Valid values are On or Off. Default is Off.
The delay time is calculated by multiplying the IS1001's Reader ID
by 1 second.
Set Reader ID in HEX
Sets the distinctive ID for this IS1001 reader. The ID is a
hexadecimal value in the range 01 – FF. Default is 01.
Set Reader Idling Time in Milliseconds
Sets for how long to switch the IS1001 reader into Standby mode
(to conserve power) after each FDXB cycle, which is defined by
FDXB Detection Scan Time parameter, or after each HDX cycle, if
Commands
35