Maintenance - Biomark IS1001 Operation User's Manual

Maintenance

Maintenance
Warning! Only qualified service personnel should access the internal components of
the IS1001 reader The IS1001 reader must be disconnected from the power source
before performing such tasks.
The IS1001 reader requires very little maintenance. To keep it operating at peak efficiency you
should periodically do the following:
•
Check all wire and cable connections
•
Remove any dust and dirt
•
Perform a full re-tune of the IS1001 reader's antenna (see page 13
•
Periodically download data from internal memory by using the MED command
•
If optional USB Data Logger Board is used for IS1001 data collection, periodically download
the data or replace the flash drive before it becomes full (see IS1001 USB Data Logger User
Manual).
Warning! Do not remove the USB flash drive while data is being written to it. To safely
remove the USB flash drive, use the Eject External Storage button.
•
If optional BLE Data Logger Board is used for IS1001 data collection, periodically download
the data before the logger's memory becomes full (see IS1001 BLE Data Logger User
Manual).
50
) .
X
IS1001 Reader User Manual