Assigning Static Ip Address To Is1001 Reader - Biomark IS1001 Operation User's Manual

Configuring IS1001 Reader Ethernet Settings

Assigning Static IP Address to IS1001 Reader

When you first connect the IS1001 reader to your network it will typically be assigned a random
IP address based on your network addressing scheme. Depending on your network configuration,
this IP address may change each time you power the IS1001 reader off and on. To assign the
IS1001 reader a static IP address:
1. Obtain an IP address from your network administrator.
2. Connect the IS1001 reader to your network using the Ethernet port.
3. Within the Lantronix DeviceInstaller, click on Search to locate the IS1001 reader and identify
its present IP address.
Note: If there are multiple IS1001 readers at the site, use the MAC address of the IS1001
readers' Ethernet module to uniquely identify each IS1001 reader.
4. In the left-hand pane, select the IS1001 reader's XPort module by clicking on its IP address.
5. Click on the Assign IP button and follow the on-screen instructions for assigning a specific IP
address.
26 IS1001 Reader User Manual