Exciter Board; Remote Communication Board - Biomark IS1001 Operation User's Manual

Exciter Board

The Exciter Board incorporates the following: the antenna exciter with adjustable power output,
dynamic tuning capacitors, antenna exciter oscillator synchronization interface, Virtual Test Tag,
and FDX-B tag and HDX tag signal detectors.
Power CAN Bus
Connector Port
Antenna Exciter Oscillator
Connector Synchronization
Connector

Remote Communication Board

The Remote Communication Board incorporates the Ethernet and fiber optic communication
interface and enables remote access to the connected IS1001 reader for data collection and
reader configuration.
The board contains two jumpers to enable each individual communication port. It is recommended
to use only one communication port at a time, to avoid communication conflicts. To disable one
of the ports, to save on power consumption, remove the corresponding jumper. This board also
contains IS1001 status LEDs and an IS1001 beeper.
IS1001 Reader User Manual
Exciter Board
Power LEDs
Synchronization
33 nF Capacitor
Network Termination
Bypass Jumper
Jumper
Description
5