Cisco Remote PHY Shelf 7200 Installing page 26

Hide thumbs Also See for Remote PHY Shelf 7200:

Table of Contents

Connecting Power to the AC-Powered Cisco Remote PHY Shelf 7200

Step 6

Use the two Power Shelf ejectors to eject the Power Shelf from the chassis.

Note

The Power Shelf to Power Modules are keyed AC modules to the AC Shelf and DC modules to the DC Shelf

Connecting Power to the AC-Powered Cisco Remote PHY Shelf 7200

Warning

Before connecting AC Power, the chassis ground connection must always be made first and disconnected

last.

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement

1030

The HA-RPHY-AC-SHLF has four input connectors. Each input connector corresponds to the AC Power

Module installed in the front of the chassis. They are IEC60320, C22 inlet connectors, which require facility

power cords with a C21 style connector. These are similar to a standard C19/C20 combination, but they have

Installing the Cisco Remote PHY Shelf 7200

Table of Contents