Cisco Remote PHY Shelf 7200 Installing page 5
Hide thumbs
Also See for Remote PHY Shelf 7200:
- Software configuration manual and command reference (116 pages) ,
- Maintaining (12 pages)
Table of Contents
Advertisement
Installing the Cisco Remote PHY Shelf 7200
Figure 4: Installing rack-mount brackets mid mount
Step 4
Repeat the steps 1, 2, and 3 on the other side of the chassis.
Installing the Cisco Remote PHY Shelf 7200 in a Rack
You can install the chassis in either a four-post rack unit or a two-post rack unit.
Before you begin
1. Verify rack dimensions.
2. Install chassis installation brackets.
3. Attach the chassis rack-mount brackets.
Installing the Cisco Remote PHY Shelf 7200 in a Rack
Installing the Cisco Remote PHY Shelf 7200
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Remote PHY Shelf 7200 and is the answer not in the manual?
Questions and answers