Attaching The Cable-Management Bracket - Cisco Remote PHY Shelf 7200 Installing

Installing the Cisco Remote PHY Shelf 7200
Step 8
Ensure that all screws on each of the side rack-mount brackets are tightened to the equipment rack before the chassis
installation bracket is removed from the rack.
What to do next
Attaching the Cable-Management Bracket, on page

Attaching the Cable-Management Bracket

The rear RF cable management system is provided in the accessory kit. There is a right hand side and a left
hand side for the chassis.
Attaching the Cable-Management Bracket
11.
Installing the Cisco Remote PHY Shelf 7200
11