Target Positioner For Leksell Headring; Overview - Brainlab RT/RS Hardware User's Manual

Target Positioner for Leksell Headring

5.2 Target Positioner for Leksell Headring
5.2.1

Overview

Overview
The Target Positioner for Leksell Headring may only be used with the Leksell G-Frame
headring. It enables alignment of the patient's isocenter with the wall lasers.
The Target Positioner for Leksell Headring may only be used with a Brainlab treatment
planning system.
Components
No.
84
②
①
Component
Target Positioner
①
Carrier Plates
Stereotactic Target
②
Positioner
③
Adhesive Tape
Target Positioner
④
Overlay
③
Figure 48
Explanation
One carrier plate is attached to each side of the target positioner.
Consists of an aluminum frame with room for four carrier plates.
Used to attach the overlays to the carrier plates.
Shows the patient's isocenter. Printed out and taped to the carrier
plates.
Hardware User Guide Rev. 4.9 RT / RS Stereotactic Hardware
④