Mounting The Stereotactic Target Positioner - Brainlab RT/RS Hardware User's Manual

Stereotactic Target Positioner
5.1.3

Mounting the Stereotactic Target Positioner

How to Mount the Target Positioner
Steps
Safe Handling
Do not use the Stereotactic Target Positionerif the three ball feet do not fit correctly into
the holes provided in the Stereotactic Headring or Stereotactic Mask System, or if the locks
do not firmly secure the target positioner into place.
Do not use the Stereotactic Target Positioner for patient treatment if it is in any way warped
or damaged, or if parts of the target positioner or carrier plates are loose.
80
Mount the Stereotactic Headring or Stereotactic Mask System to the couchmount
1.
adapter using the two t-screws provided.
Bring the three ball feet of the target positioner in line with the corresponding holes in
2.
the headring or mask system (Figure 45, left).
Insert the ball feet into the holes and secure the target positioner by firmly tightening
3.
the three locks (Figure 45, right).
Figure 45
Hardware User Guide Rev. 4.9 RT / RS Stereotactic Hardware