Registering Additional Blades - NEC UNIVERGE SV8300 Pc Programming Manual

No. Item
(4) [Read] button
(5) [Apply] button
(6) [Zoom In] button

Registering Additional Blades

To register an additional blade, follow these steps:
STEP1: Select a unit number in Unit No. field.
STEP2: Click [Read] button.
A screen is displayed to notify the completion of the data read process.
Blade information is read from the SV8300 having the unit number specified in the Unit No.
field, and information about the blades mounted in the SV8300 is displayed in the Blade Dis-
play Area of the [Blade Configuration] screen.
STEP3: Click the [OK] button.
Click to read blade information from the SV8300 having its unit number
specified in the Unit No. field.
Click to write edited data to the SV8300.
Click to display a preferences screen for the blade selected in the Blade
Display Area.
[OK] button
4-28
Chapter 4 Standard Mode
Description
[Implement] Category
NWA-033628-001 Rev.1.0