Set A Schedule - NEC UNIVERGE SV8300 Pc Programming Manual

NOTE 4: You can confirm the status of program upgrade by the S1 lamp of CPU blade.
Under Upgrading
Program upgrade is completed
Program changeover is completed
Upgrade fails/Upgrade is interrupted
Under program copying from upgraded side to outdated side
Program copy from upgraded side to outdated side is completed

Set a Schedule

You can enter and read FTP server information, the upgrade date and time and change over date and
time for each unit on which the CPU program is upgraded.
STEP1: Click the [Scheduling] tab.
The [Scheduling] screen is displayed.
(1)
(6)
(7)
Upgrade Status
4-50
Chapter 4 Standard Mode
[Upgrade] Category
S1 Lamp Status
(Green)
Flash quickly
Remain Lit
Disappear
Flash normally
Flash slowly
Disappear
(2)
(3)
(4)
(5)
NWA-033628-001 Rev.1.0