NEC UNIVERGE SV8300 Pc Programming Manual page 69

No. Item
(4) System Data
Setup Area
STEP6: Click the [OK] button.
You are directed back to the [7. Setting of Trunk] screen.
STEP7: Click the [OK] button.
You are directed back to the [Quick Setup] screen. Checked mark appears to the right of but-
ton [7].
Trunks have now been configured.
Port No. field Displays the number of the Port number (unit number + slot
number + line number) that houses the trunk.
Trunk No. Enter a trunk number associated with the Port number with
field three digits.
• 4 digits ["D" + 000 to 511, blank field] (default: blank
field)
* If a number is entered without being prefixed by "D", it
is automatically prefixed with "D".
If a number is entered with one or two digits, it is also
automatically padded with "D00" or "D0". If a four-digit
number is entered, it is prefixed with "D" automatically,
with the last digit being removed.
RT No. field Select a trunk route number according to the numbering plan
setting.
• 00 to 63 (default: 01)
TN No. field Select a trunk tenant number.
• 00 to 63 (default: 01)
Description
4-23
Chapter 4 Standard Mode
[Implement] Category
NWA-033628-001 Rev.1.0