Run A Script - NEC UNIVERGE SV8300 Pc Programming Manual

Run a Script

STEP1: Do either of the following:
• Click [Script] on the standard mode submenu.
• On the Main Menu, click [Tools] > [Script] in this order.
The [Script] screen appears in the work window.
STEP2: Click the [Open] button.
The [Script] screen appears.
STEP3: Select the system data (CSV file) you have saved in Step 4 in "
click the [Open] button.
The script is loaded into the Script Entry Area.
STEP4: Click the [Apply] button.
A script file has now been run.
4-70
Chapter 4 Standard Mode
[Tools] Category
Create a script file" and
NWA-033628-001 Rev.1.0