NEC UNIVERGE SV8300 Pc Programming Manual page 148

STEP3: Set system data as needed.
System Data Mode
submenu
No. Item
(1) [Read] button
(2) [Apply] button
(3) Data Entry field
(4) Data selection pull-
down menu
(5) Data selection radio
buttons
(6) Button
Click to read system data registered in the SV8300. This button is used to
restore system data to the original settings.
Click to write the set system data to the SV8300.
Enter data to be set.
Click to select data to be set.
Check the data to be set.
Click to run the functions of the SV8300.
5-4
Chapter 5 System Data Mode
Description
Using System Data Mode
(1)
(2)
(3)
(4)
(5)
(6)
NWA-033628-001 Rev.1.0