Saving System Data - NEC UNIVERGE SV8300 Pc Programming Manual

Saving System Data

You can save the system data registered on the SV8300 to PCPro in these steps:
STEP1: Click [Save] button in the [System Data Save/Load/Verify] screen.
The [Save] screen is displayed in the work window.
Area Name field
Area Number field
Office Name field
File Name field
[Select Folder] button
[Save] button
[<< Back] button
STEP2: Select the area of the system data to be saved in the Area Name field.
The number of the selected system data area is displayed in the System Data Area Number
field. If you have chosen to specify an Area Number, enter the Area Number of the system
data in the Area Number field.
System data area name
All system data and All service
memory
All system data (without Speed Dial-
ing)
All service memory
System Speed Dialing
Station Speed Dialing
Area number
1,2,3,4,80,81
1 System data only
2 Service memory only
3 CM71,72
4 CM73,74
4-82
Chapter 4 Standard Mode
[Maintenance] Category
Remarks Differences
Continued on next page
NWA-033628-001 Rev.1.0
Yes
–
Yes
–
–