[Maintenance] Category; System Configuration Display - NEC UNIVERGE SV8300 Pc Programming Manual

[Maintenance] Category

The [Maintenance] Category is organized into the following five submenus:

• System Configuration Display

• Status Display (Blade/Trunk)
• Fault Display
• System Data Save/Load/Verify
• Reset
System Configuration Display
The [System Configuration Display] reads system configuration and blade information, and detailed Port
information from the SV8300 and presents the information in HTML format. Work in the following steps:
NOTE:
Establish a communication link with the SV8300 to view system configuration information
For how to establish a communication link, refer "Establishing a Link".
STEP1: Take one of these actions:
• Click submenu [System Configuration Display] in Standard Mode.
• On the Main Menu, click [System] > [Maintenance] > [System Configuration Display] in this
order.
The [System Configuration Display] screen is displayed in the work window.
• To edit the read out information from the SV8300: Go to Step 2.
• To leave the read out information from the SV8300 unchanged: Go to Step 5.
[System Configuration
Display] menu
Page 4-71
Page 4-74
Page 4-79
Page 4-81
Page 4-92
(1)
(2)
(4)
(3)
4-71
Chapter 4 Standard Mode
[Maintenance] Category
Page 2-12
NWA-033628-001 Rev.1.0