NEC UNIVERGE SV8300 Pc Programming Manual page 61

STEP3: Click the LC/DLC blade mounted in the slot in the right-click menu.
The blade name is displayed on the blade in the Blade Display Area.
Right-click menu
Telephone (LC)
Telephone (DLC)
Delete Blade
STEP4: Click the [Zoom In] button.
The [5. Setting of Station > Zoom In] screen is displayed in the work window.
STEP5: Set item (3).
(1)
(3)
[OK] button
Choose one of the following combination of LC blades mounted:
• LC(4+4): CD-4LCA + PZ-4LCA
• LC(4) : CD-4LCA
• LC(4+8): CD-4LCA + PZ-8LCE
• LC(8+4): CD-8LCA + PZ-4LCA
• LC(8+8): CD-8LCA + PZ-8LCA
• LC(8) : CD-8LCA
Choose one of the following combination of DLC blade mounted:
• DLC(16) : CD-16DLCA
• DLC(8+8): CD-8DLCA + PZ-8DLCB
• DLC(8) : CD-8DLCA
Click to delete the information about the blade mounted in the slot.
4-15
Chapter 4 Standard Mode
Description
[Implement] Category
(2)
NWA-033628-001 Rev.1.0