Table of Contents
Advertisement
Chapter 2 Preparations
1.14
Additional HDD Cage
This server can have additional HDD cage for installing additional hard disk drives. The additional HDD cage is
installed on front side of the server, and is used exclusively with the optical disk drive.
Installation
1.14.1
Follow steps below to install an additional HDD cage.
1.
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
If an optical disk drive is already installed, disconnect the cable from optical disk drive.
3.
Remove the screw that secures the optical disk drive bay bracket.
4.
Pull out the optical disk drive bay bracket to the direction shown by an arrow.
Note
Keep the removed bracket for future use.
Express5800/R120d-1M User's Guide
1. Installing Internal Optional Devices
85
Advertisement
Table of Contents
