Deleting Blade Information - NEC UNIVERGE SV8300 Pc Programming Manual

Deleting Blade Information

To delete information about a blade registered in the SV8300, follow these steps:
STEP1: Select a unit number in Unit No. field.
STEP2: Click the [Read] button.
Blade information is read from the SV8300 having the unit number specified in the Unit
Number field, and information about the blades mounted in the SV8300 is displayed in the
Blade Display Area of the [Blade Configuration] screen.
STEP3: Click the [OK] button.
STEP4: Right-click the slot you want to delete blade information from in Blade Display Area.
A right-click menu is displayed.
Right-click
menu
STEP5: Click [Delete Blade] on the right-click menu.
The blade information is deleted from the slot in the Blade Display Area.
NOTE:
By now, all blade information has been deleted, including the information registered in the
[Blade Configuration] screen.
Blade information has now been deleted.
[OK] button
4-34
Chapter 4 Standard Mode
[Implement] Category
[Delete Blade]
menu
NWA-033628-001 Rev.1.0