NEC UNIVERGE SV8300 Pc Programming Manual page 86

STEP7: Click the [Register] button.
The license data is registered in the SV8300 and the [Create License Data] screen is displayed.
To proceed with another copy of license data, click the [Register Next License] button and re-
peat from Step 3. When the registration of the complete set of license data is completed, go to
Step 8.
STEP8: Check the "Prepare "PBX Generator File" used by contents of 'Information of Software License
Authentication' which is displayed".
"Prepare "PBX Generator File"
used by contents of
'Information of
Lisense Authentication'
which is displayed."
check box
PBX Generator File field
[Complete] button
[Register the Next License]
The name of the folder in which the PBX generation file created is saved and its file name are
displayed in the PBX Generator File field.
STEP9: Click the [Complete] button.
A dialog box is displayed to notify the completion of the license data registration.
STEP10: Click the [OK] button.
You are directed back to the [Software License Authentication] screen.
The license data has now been registered in the SV8300.
The next step is to obtain an Activation Code.
button
[OK] button
4-40
Chapter 4 Standard Mode
[Upgrade] Category
NWA-033628-001 Rev.1.0